Loading...
Serving Coconut Creek, FL and surrounding areas. (954) 306-2112
Your concrete looks tired and every cleaner you try only goes so far. Metallic epoxy transforms it into a glossy, one-of-a-kind surface built to handle South Florida heat, humidity, and daily life.
Metallic epoxy flooring in Coconut Creek is a thick, poured coating applied over your existing concrete slab, containing fine metallic powder that swirls as it cures to create a glossy, stone-like finish unique to every floor. Most residential jobs take two to three days from prep through final coat.
If your garage or interior concrete looks worn, stained, or just dull no matter how much you clean it, metallic epoxy is worth a serious look. It covers surface discoloration completely, seals the slab against moisture and spills, and turns a room that felt like an afterthought into one of the nicer spaces in your home. Many Coconut Creek homeowners who start with one room come back for a second.
For spaces that need maximum durability over aesthetics - think commercial kitchens, laundry rooms, or high-traffic utility areas - our urethane cement flooring is worth comparing. Both options start with the same critical prep step: testing your slab for moisture before any coating goes down.
If your concrete floor has oil stains, rust marks, or just looks tired and gray no matter how much you clean it, that is a clear sign it is a good candidate. The metallic epoxy coating covers surface discoloration completely and gives you a fresh, glossy surface that is much easier to maintain going forward.
That chalky residue on concrete floors in South Florida is called efflorescence - it is caused by moisture moving up through the slab and leaving mineral deposits behind. It is common in Coconut Creek because of the shallow water table. If you are seeing it, a moisture issue needs to be addressed before any coating goes down, and a good contractor will handle both together.
If you have old tile, vinyl, or carpet that is cracking, peeling, or just outdated, removing it and going straight to a metallic epoxy finish is a popular move in Coconut Creek homes. You end up with a seamless, modern surface that does not trap allergens the way carpet does and does not have grout lines to scrub the way tile does.
Hairline cracks are common in older Coconut Creek slabs, especially homes built before 1990. They are usually cosmetic rather than structural, but they will show through any coating if they are not filled first. If you can see cracks or feel rough spots, that is your cue to get a professional look before the damage spreads or becomes a tripping hazard.
Every metallic epoxy project we do starts with a free on-site assessment. We look at the slab, test for moisture, and talk through the finish options before we quote anything. The metallic effect is created by manipulating the wet coating with tools and air during application - no two floors come out identical, and we show you samples so you have a clear picture of what to expect. For clients who want a comparable look without the metallic shimmer, standard epoxy floor coatings offer the same tough surface in solid colors and chip finishes.
If your slab has cracks, chips, or previous coating residue, we take care of those during the prep phase - that work is part of the job, not an extra. Our topcoat layer adds UV resistance and scratch protection, which matters in Florida where windows let in intense sunlight year-round. For commercial clients, warehouses, or showroom floors that see heavier use, we also offer urethane cement flooring as an industrial-grade alternative to epoxy.
Ideal for homeowners who want a high-gloss, custom-look floor in a garage, living area, or kitchen.
For clients who want a statement floor - flowing patterns, ocean waves, or lava-style finishes that make the room.
Adds a grip broadcast to the clear topcoat - recommended for garages and lanai areas where the floor gets wet.
Coconut Creek sits in Broward County on land that was historically part of the Everglades drainage system - which means the water table is often just a few feet below your slab, and year-round humidity rarely drops below 60 percent. That combination pushes moisture up through concrete constantly. Most generic coatings bubble and peel within a year here because they are not designed for that pressure. Metallic epoxy installed with a moisture-barrier primer handles it - which is why it is such a practical choice for Coconut Creek homes, not just a decorative one. Many homes in the city, including neighborhoods near Tradewinds Park, have slabs from the 1980s that are excellent candidates once the prep is done right.
We serve all of Coconut Creek and the surrounding communities. Homeowners in Margate and Coral Springs deal with the same slab conditions and can expect the same process - moisture testing first, mechanical prep, and a written estimate before any work begins.
Call or fill out the contact form and expect a response within one business day. We ask a few quick questions - the size of the space, what is currently on the floor, and what you are hoping to get out of the project - so the site visit is focused and efficient.
We come to your property and examine the slab - checking for cracks, moisture, old coatings, and surface texture. A moisture test is part of every assessment we do, not an upcharge. The written estimate you receive covers prep, materials, and labor, with no add-ons after work starts unless something unexpected turns up and we tell you first.
We grind the concrete mechanically to create a proper bonding profile, then apply the base coat, metallic layer, and clear protective topcoat in sequence. Each layer sets before the next goes on. The metallic effect is created during application - this is the step where the installer's skill shows, and it is why no two floors look the same.
You can walk on the floor lightly after about 24 hours. Wait 72 hours before moving furniture back in, and about a week before parking a vehicle on a garage floor. Before we leave, we walk you through the finished floor and explain exactly how to clean it and what to avoid - including which cleaners to skip so you do not dull the finish.
Free on-site estimate. Moisture test included. No obligation.
(954) 306-2112Coconut Creek slabs sit close to the water table, and skipping the moisture test is the single most common reason epoxy floors fail in South Florida. We test every slab and apply a moisture-barrier primer when readings call for it - because a floor that bubbles in six months is not a result we want our name on.
The estimate you receive covers prep, materials, and labor with line-item detail. If something unexpected comes up during prep - an old coating layer, a deeper crack - we tell you before we proceed, not after. No surprise invoices at the end of the job.
We grind the concrete surface to create a proper bonding profile before any coating goes down. Acid etching alone is not sufficient for South Florida slabs - contractors who rely on it see more peeling call-backs than those who grind. Proper prep is where the longevity is built. The International Concrete Repair Institute publishes surface preparation guidelines that inform how we approach every job.
Florida requires contractors performing flooring and coating work to hold a valid state license. We are fully licensed and carry liability insurance. You can verify any contractor license before signing anything through the Florida DBPR - it takes about two minutes and tells you whether the license is active.
Working in Coconut Creek specifically means understanding the slab conditions, the humidity, and the HOA communities that make up most of this city. That local knowledge is baked into how we prep, how we schedule, and what we recommend - not something we add as a sales point after the fact.
A tougher, industrial-grade floor coating engineered for high moisture and heavy-use spaces - especially practical for Coconut Creek homes with ongoing slab moisture issues.
Learn MoreSolid-color and chip-broadcast epoxy finishes that deliver the same durable, sealed surface in a more straightforward aesthetic than metallic designs.
Learn MoreFall and winter book fast - the best months for epoxy work in South Florida. Reach out now to lock in your project date.